Alcatel-Lucent 6850-48 参考指南
Health Monitoring Commands
page 50-6
OmniSwitch CLI Reference Guide
September 2009
show health threshold
Displays current health threshold settings.
show health threshold [rx | txrx | memory | cpu | temperature]
Syntax Definitions
rx
Displays the current input (RX) traffic threshold.
txrx
Displays the current output/input (TX/RX) traffic threshold.
memory
Displays the current RAM memory usage threshold.
cpu
Displays the current CPU usage threshold.
temperature
Displays the current chassis temperature threshold.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Unless a specific resource type (i.e., rx, txrx, memory, cpu, or temperature) is specified, threshold
information for all resources displays.
• To display only a specific threshold, enter the command, followed by the specific resource type
(rx, txrx, memory, cpu, or temperature). For example, to display only the memory threshold, enter
the following syntax: show health threshold memory.
the following syntax: show health threshold memory.
Examples
-> show health threshold
Rx Threshold
= 80
TxRx Threshold
= 80
Memory Threshold
= 80
CPU Threshold
= 80
Temperature Threshold = 50