Alcatel-Lucent 6850-48 参考指南
QoS Commands
page 52-32
OmniSwitch CLI Reference Guide
September 2009
debug qos internal
Displays debugging information for QoS internal to the switch.
debug qos internal [slice slot/slice] [flow] [queue] [port] [l2tree] [l3tree] [vector] [pending] [verbose]
[mapper] [pool] [log] [pingonly | nopingonly]
[mapper] [pool] [log] [pingonly | nopingonly]
Syntax Definitions
slot/slice
The slot number and slice for which you want to view debugging infor-
mation. A slice is a logical section of hardware that corresponds to
particular ports on a network interface module.
mation. A slice is a logical section of hardware that corresponds to
particular ports on a network interface module.
flow
Displays information about QoS flows.
queue
Displays information about QoS queues.
port
Displays information about QoS ports.
l2tree
Displays information about Layer 2 flows.
l3tree
Displays information about Layer 3 flows.
vector
Displays information about vectors.
pending
Displays information about pending QoS objects.
verbose
Sets the output to verbose mode for more detailed information.
mapper
Displays information about QoS mapping flows to queues.
pool
Displays information about the buffer pool.
log
Displays information about QoS information that is logged.
pingonly
Specifies that any policies configured with an ICMP protocol condition
apply only to ICMP echo-requests and echo-replies.
apply only to ICMP echo-requests and echo-replies.
nopingonly
Configures the switch so that any policies configured with an ICMP
protocol condition apply to any ICMP packets.
protocol condition apply to any ICMP packets.
Defaults
Debugging is disabled by default.
Platforms Supported
OmniSwitch 6400, 6800, 6850, 6855, 9000
Usage Guidelines
Use the debug qos command to set the level of log detail in the QoS log.
parameter
default
pingonly | nopingonly
nopingonly