Alcatel-Lucent 6850-48 参考指南
QoS Commands
page 52-36
OmniSwitch CLI Reference Guide
September 2009
qos revert
Deletes any QoS configuration that has not been applied to the configuration through the qos apply
command.
command.
qos revert
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use this command to remove currently configured policies that have not yet been activated through the
qos apply command.
qos apply command.
Examples
-> qos revert
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaQoSConfigTable
alaQoSConfigRevert
Configures a policy rule and saves it to the current configuration but
does not make it active on the switch.
does not make it active on the switch.
Applies all QoS settings configured on the switch to the current configu-
ration.
ration.
Resets the QoS configuration to its defaults.