Alcatel-Lucent 6850-48 参考指南

QoS Commands

page 52-56

OmniSwitch CLI Reference Guide

Configures the ToS/DSCP value to be inserted in flows ingressing on an untrusted port.

qos port slot/port default dscp value

The slot number and port number of the physical port.

The ToS/DSCP value. The range is 0–63.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The value configured by this command sets the upper byte (precedence) and therefore configures the 

ToS/DSCP value for the port.

• The default DSCP value is not used if there is a matching QoS policy rule that sets the priority.

• Note that on the 802.1p bit for tagged packets received on untrusted ports is set with the default 802.1p 

value, which is configured using the 

 command. If the packet is untagged, 

however, then the DSCP bit is set with the default DSCP value, which is configured using the qos port 
default dscp command.

-> qos port 3/1 default dscp 63

Release 6.1; command was introduced.

0