Alcatel-Lucent 6850-48 参考指南

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-51

Configures a multicast IP address for a policy condition.

policy condition condition_name multicast ip ip_address [mask netmask]

policy condition condition_name no multicast ip

The name of the condition.

The multicast IP address.

Optional. The mask for the multicast IP address.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If a mask is not specified, the IP address is assumed to be a host address.

• A multicast IP address and a multicast network group cannot be specified in the same condition.

• Use the no form of the command to remove a multicast IP address from a condition; however, at least 

one classification parameter must be associated with a condition.

-> policy condition cond4 multicast ip 224.1.1.1

Release 6.1; command was introduced.

Creates a policy condition.

Applies configured QoS and policy settings to the current configuration.