Alcatel-Lucent 6850-48 参考指南

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-57

Associates a multicast group with a policy condition.

policy condition condition_name multicast network group multicast_group

policy condition condition_name no multicast network group

The name of the condition.

The multicast group name. Multicast groups are configured through the 
policy network group command.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove a multicast group from a condition; however, at least one 

classification parameter must be associated with a condition.

• A multicast address and a multicast network group cannot be specified in the same condition.

-> policy condition cond3 multicast group video2

Release 6.1; command was introduced.

Creates a policy condition.

Configures a network group name and its associated IP addresses. 

Applies configured QoS and policy settings to the current configuration. 

Shows information about policy conditions configured on the switch.

Displays information about policy network groups.