Alcatel-Lucent 6850-48 参考指南

QoS Policy Commands

page 53-88

OmniSwitch CLI Reference Guide

Configures an IPv6 next header value as a policy condition. This value is compared to the next header 
value in the IPv6 header.

policy condition condition_name nh next_header_value

policy condition condition_name no nh

The name of the condition.

The next header value (0–255).

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Use the no form of the command to remove the next header value as a condition; however, at least one 
classification parameter must be associated with a condition.

-> policy condition cond4 nh 100

-> policy condition cond4 no nh

Release 6.1.3; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Shows information about policy conditions configured on the switch.