Alcatel-Lucent 6850-48 参考指南

QoS Policy Commands

page 53-102

OmniSwitch CLI Reference Guide

Associates a destination MAC group with a policy condition.

policy condition condition_name destination mac group mac_group

policy condition condition_name no destination

The name of the condition. May be an existing condition name or a new 
condition.

The name of the destination MAC group, configured through the policy 
mac group command. See 

 for more information about this 

command.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove a destination MAC group from a policy condition; 

however, at least one classification parameter must be associated with a condition.

• A destination MAC address and a destination MAC group cannot be specified in the same condition.

-> policy condition cond5 destination mac group mac_group1

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Configures a MAC group and its associated MAC addresses.

Creates a policy condition.

Shows information about policy conditions configured on the switch.