Alcatel-Lucent 6850-48 参考指南
QoS Policy Commands
page 53-202
OmniSwitch CLI Reference Guide
September 2009
show policy map group
Displays information about pending and applied policy map groups.
show [applied] policy map group [group_name]
Syntax Definitions
applied
Indicates that only map groups that have been applied should be
displayed.
displayed.
group_name
The name of the policy map group for which you want to display infor-
mation; or a wildcard sequence of characters for displaying information
about map groups with similar names. Use an asterisk (*) to indicate a
wildcard character.
mation; or a wildcard sequence of characters for displaying information
about map groups with similar names. Use an asterisk (*) to indicate a
wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Information for all policy map groups displays unless group_name is specified.
• The display may include any of the following characters:
Examples
-> show policy map group
Group Name
From
Entries
+tosGroup
cli
1-2:4
4:5
character
definition
+
Indicates a new policy port group.
-
Indicates the policy port group is pending deletion.
#
Indicates that the policy port group differs between
the pending/applied port groups.
the pending/applied port groups.
output definitions
Group Name
The name of the map group, configured through the policy map group
command.
command.
From
The origin of the port group: cli indicates that the entry was configured
on the switch; ldap indicates the entry was configured through Policy-
View.
on the switch; ldap indicates the entry was configured through Policy-
View.
Entries
The slot/port combinations associated with the port group.