Alcatel-Lucent 6850-48 参考指南

Policy Server Commands

page 54-12

OmniSwitch CLI Reference Guide

Displays the names of policies originating on a directory server that have been downloaded to the switch.

N/A

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

This command displays information about policies created on directory servers only. 

 for information about configuring and displaying policies directly on the switch.

-> show policy server rules

Num

name

prio

scope

status

---+-------------------+-------+-------------+------------

1

QoSRule1

0

Provisioned

Active

2

QoSrule2

0

Provisioned

Active

Fields are defined here:

An index number corresponding to the policy rule.

The name of the policy rule; only rules configured through PolicyView 
are displayed in this table.

The priority or preference of the rule. Indicates the order in which rules 
will be checked for matching to incoming traffic. If two or more rules 
apply to the traffic, the rule with the highest preference is applied. Pref-
erence is determined when the rule is created.

The type of rule. Provisioned is the only type valid currently.

The status of the rule: Active indicates that the rule has been pushed to 
the QoS software in the switch and is available to apply to traffic; 
notInService means the rule may be pushed to the QoS software in the 
future but is not available yet (typically because of a variable validity 
period); notReady indicates that the rule will never be pushed to the 
QoS software because its validity period has expired or because it has 
been disabled through SNMP.