Alcatel-Lucent 6850-48 参考指南

IP Multicast Switching Commands

OmniSwitch CLI Reference Guide

page 55-7

Enables or disables IGMP querier forwarding on the specified VLAN or on the system if no VLAN is 
specified.

ip multicast [vlan vid] querier-forwarding [{enable | disable}]

no ip multicast [vlan vid] querier-forwarding

The VLAN on which configuration is applied.

Enable IGMP querier forwarding.

Disable IGMP querier forwarding.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an IGMP querier forwarding entry on the specified VLAN 

or on the system and return to its default behavior.

• If the IGMP querier forwarding is already enabled on the system, then the VLAN configuration will 

override the system's configuration.

• IGMP querier forwarding refers to promoting detected IGMP queriers to receive all IP multicast data 

traffic.

-> ip multicast querier-forwarding enable

-> ip multicast querier-forwarding disable

-> ip multicast querier-forwarding

-> ip multicast vlan 2 querier-forwarding enable

-> ip multicast vlan 2 querier-forwarding disable

-> ip multicast vlan 2 querier-forwarding

-> no ip multicast vlan 2 querier-forwarding

Release 6.3.1; command was introduced.

enable | disable