Alcatel-Lucent 6850-48 参考指南

IP Multicast Switching Commands

OmniSwitch CLI Reference Guide

page 55-29

Sets the value of the IGMP unsolicited report interval

 

on the specified VLAN or on the system if no 

VLAN is specified.

ip multicast [vlan vid] unsolicited-report-interval [seconds]

VLAN on which to apply the configuration.

IGMP query response interval in seconds. Valid range is 1 to 65535, 
where 0 represents the default setting.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• IP Multicast Switching and Routing must be enabled to set the IGMP unsolicited report interval on the 

system and/or the specified VLANs.

• If the IGMP query response interval is already configured on the system, then the VLAN configura-

tion will override the system's configuration.

• The unsolicited report interval refers to the time period to proxy any changed IGMP membership state.

• To restore the IGMP unsolicited report interval to its default (i.e., 1 second) value on the system if no 

VLAN is specified, use ip multicast unsolicited-report-interval followed by the value 0 (e.g., ip 
multicast unsolicited-report-interval 0) or use only ip multicast unsolicited-report-interval (e.g., ip 
multicast unsolicited-report-interval).

• To restore the IGMP unsolicited report interval to its default (i.e., 1 second) value on the specified 

VLAN, use ip multicast vlan vid unsolicited-report-interval followed by the value 0 (e.g., ip multi-
cast vlan 2 unsolicited-report-interval 0) or use only ip multicast vlan vid unsolicited-report-inter-
val (e.g., ip multicast vlan 2 unsolicited-report-interval).

-> ip multicast 

unsolicited-report

-interval 200

-> ip multicast 

unsolicited-report

-interval 0

-> ip multicast 

unsolicited-report

-interval

-> ip multicast vlan 2 

unsolicited-report

-interval 300

-> ip multicast vlan 2 

unsolicited-report

-interval 0

-> ip multicast vlan 2 

unsolicited-report

-interval

1