Alcatel-Lucent 6850-48 参考指南

IP Multicast Switching Commands

OmniSwitch CLI Reference Guide

page 55-43

Enables or disables IGMP proxying on the specified VLAN or on the system if no VLAN is specified.

ip multicast [vlan vid] proxying [enable | disable]

VLAN on which to apply the configuration.

Enable IGMP proxying.

Disable IGMP proxying.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If the IGMP proxying is already enabled on the system, then the VLAN configuration will override the 

system's configuration.

• IGMP proxying refers to processing membership information on behalf of client systems and reporting 

membership on their behalf.

• You can also restore the IGMP querying to its default (i.e., disabled) setting on the system if no VLAN 

is specified, by using only ip multicast proxying (e.g., ip multicast proxying).

• You can also restore the IGMP querying to its default (i.e., disabled) setting on the specified VLAN, 

by using only ip multicast vlan vid proxying (e.g., ip multicast vlan 2 proxying).

-> ip multicast proxying enable

-> ip multicast proxying disable

-> ip multicast proxying

-> ip multicast vlan 2 proxying enable

-> ip multicast vlan 2 proxying disable

-> ip multicast vlan 2 proxying

Release 6.1.3; command was introduced.