Alcatel-Lucent 6850-48 参考指南

IP Multicast VLAN Commands

page 56-4

OmniSwitch CLI Reference Guide

Defines the mapping between an IPMVLAN and a customer VLAN ID (c-tag) to be used in the c-tag 
translation rule.

vlan ipmvlan ipmvlan-id ctag {ctag | ctag1-ctag2}

no vlan ipmvlan ipmvlan-id ctag {ctag | ctag1-ctag2}

Specifies the IP Multicast VLAN number for which the c-tag is to be 
assigned

.

The valid range is 2–4094.

The customer VLAN ID number is used in the translation rule. The 
valid range is 1–4094.

Specifies the range of the customer VLAN ID numbers.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove the mapping between the IPMVLAN and the customer 

VLAN ID.

• If the c-tag is already assigned to another IPMVLAN, the configuration request will fail.

• If you assign a range of c-tags to an IPMVLAN, an error message will be displayed for the c-tags 

already assigned to the IPMVLAN.

• The command will not work in Enterprise Mode.

-> vlan ipmvlan 1003 ctag 10

-> no vlan ipmvlan 1003 ctag 10

Release 6.2.1; command was introduced.