Alcatel-Lucent 6850-48 参考指南
Server Load Balancing Commands
page 57-2
OmniSwitch CLI Reference Guide
September 2009
ip slb admin
Enables or disables the administrative status for Server Load Balancing (SLB) on a switch.
ip slb admin {enable | disable}
Syntax Definitions
enable
Enables Server Load Balancing on a switch.
disable
Disables Server Load Balancing on a switch.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 9000, 9000E
Usage Guidelines
Disabling the administrative status for the SLB feature does not delete the SLB configuration from the
switch. The next time the feature is enabled, the existing configuration will go active.
switch. The next time the feature is enabled, the existing configuration will go active.
Examples
-> ip slb admin enable
-> ip slb admin disable
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
slbFeature
slbAdminStatus
parameter
default
enable | disable
disable
Displays the status of Server Load Balancing on a switch.
Configures a Server Load Balancing cluster on a switch.
Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.
Server Load Balancing clusters.