Alcatel-Lucent 6850-48 参考指南
AAA Commands
page 58-24
OmniSwitch CLI Reference Guide
September 2009
aaa authentication default
Sets the authenticated switch access type to the default server setting.
aaa authentication {console | telnet | ftp | http | snmp | ssh} default
Syntax Definitions
console
Configures the default Authenticated Switch Access server setting for
the console port.
the console port.
telnet
Configures the default Authenticated Switch Access server setting for
Telnet.
Telnet.
ftp
Configures the default Authenticated Switch Access server setting for
FTP.
FTP.
http
Configures the default Authenticated Switch Access server setting for
Web-based management.
Web-based management.
snmp
Configures the default Authenticated Switch Access server setting for
any port used for SNMP.
any port used for SNMP.
ssh
Configures the default Authenticated Switch Access server setting for
any port used for Secure Shell.
any port used for Secure Shell.
Defaults
By default, the default Authenticated Switch Access server setting does not include any servers.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the aaa authentication command to set the default servers.
Examples
-> aaa authentication telnet default
-> aaa authentication default default
Release History
Release 6.1; command was introduced.