Alcatel-Lucent 6850-48 参考指南

AAA Commands

page 58-38

OmniSwitch CLI Reference Guide

Configures whether or not users are able to traffic in the default VLAN before they are actually authenti-
cated. 

Enables the switch to allow users authenticating through the switch to 
traffic in the default VLAN prior to authentication.

Disables the switch so that users authenticating through the switch 
cannot traffic in the default VLAN prior to authentication.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• When this command is enabled, users are members of the default VLAN before authentication. After 

authenticating, users are no longer authorized for the default VLAN.

• When this command is disabled after being enabled, existing users in the default VLAN are not 

flushed.

• The default VLAN is configurable per port through the 

 command.

• The avlan default-traffic command allows Telnet and HTTP clients to obtain an IP address from a 

DHCP server in the default VLAN.

-> avlan default-traffic enable

Release 6.1; command was introduced.