Alcatel-Lucent 6850-48 参考指南

802.1X Commands

OmniSwitch CLI Reference Guide

page 59-25

Configures a different subnet for the Captive Portal IP address (10.123.0.1). 

802.1x captive-portal address ip_address

The IP address for the Captive Portal login page. This IP address must 
use the following octet values: 10.x.0.1, where “x” is used to specify a 
new subnet value.

By default, the Captive Portal IP address is set to 10.123.0.1.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If the 10.123.0.1 subnet is already in use on the network, use this command to change the second octet 

of this IP address. Note that the second octet is the only configurable part of the Captive Portal IP 
address that is allowed. 

• This IP address is used exclusively by the Captive Portal feature to serve various pages and to assign a 

temporary IP address for a client device that is attempting web-based authentication. 

-> 802.1x captive-portal address 10.11.0.1

-> 802.1x captive-portal address 10.124.0.1

Release 6.3.4; command was introduced.

alaDot1xCportalConfig

alaDot1xCPortalIpAddress

Displays the global Captive Portal configuration for the switch.