Alcatel-Lucent 6850-48 参考指南
SNMP Commands
OmniSwitch CLI Reference Guide
September 2009
page 10-25
snmp authentication trap
Enables or disables SNMP authentication failure trap forwarding.
snmp authentication trap {enable | disable}
Syntax Definitions
enable
Enables authentication failure trap forwarding. When enabled, the
standard authentication failure trap is sent each time an SNMP
authentication failure is detected.
standard authentication failure trap is sent each time an SNMP
authentication failure is detected.
disable
Disables authentication failure trap forwarding.
Defaults
By default, authentication failure trap forwarding is disabled.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> snmp authentication trap enable
-> snmp authentication trap disable
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
snmpGroup
snmpEnableAuthenTraps
Displays the current authentication failure trap forwarding status.