Alcatel-Lucent 6850-48 参考指南
Link Aggregation Commands
page 12-22
OmniSwitch CLI Reference Guide
September 2009
lacp agg actor admin key
Configures an actor administrative key for a port, which allows the port to join a dynamic aggregate group.
lacp agg [ethernet | fastethernet | gigaethernet] slot/port actor admin key actor_admin_key
[actor admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[[no] distribute] [[no] default] [[no] expire] | none}]
[actor system id actor_system_id]
[actor system priority actor_system_priority]
[partner admin system id partner_admin_system_id]
[partner admin key partner_admin_key]
[partner admin system priority partner_admin_system_priority]
[partner admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[actor system priority actor_system_priority]
[partner admin system id partner_admin_system_id]
[partner admin key partner_admin_key]
[partner admin system priority partner_admin_system_priority]
[partner admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[[no] distribute] [[no] default] [[no] expire] | none}]
[actor port priority actor_port_priority]
[partner admin port partner_admin_port]
[partner admin port priority partner_admin_port_priority]
[partner admin port partner_admin_port]
[partner admin port priority partner_admin_port_priority]
lacp agg no [ethernet | fastethernet | gigaethernet] slot/port
Syntax Definitions
ethernet
Documents that the port is 10 Mbps Ethernet.
fastethernet
Documents that the port is 100 Mbps Fast Ethernet.
gigaethernet
Documents that the port is Gigabit Ethernet.
slot
The slot number for this aggregate.
port
The port that the switch will initially use as the Spanning Tree virtual
port for this aggregate.
port for this aggregate.
actor_admin_key
The administrative key associated with this dynamic aggregate group.
Possible values are 0–65535.
Possible values are 0–65535.
actor admin state
.
actor_system_id
The MAC address of this dynamic aggregate group on the switch.
actor_system_priority
The priority of the dynamic aggregate group. Possible values are
0–255.
0–255.
partner_admin_system_id
The MAC address of the remote switch’s dynamic aggregate group.
partner_admin_key
The administrative key for the dynamic aggregation group’s remote
partner. Possible values are 0–65535.
partner. Possible values are 0–65535.
partner_admin_system_priority
The priority of the remote system to which the dynamic aggregation
group is attached. Possible values are 0–255.
group is attached. Possible values are 0–255.
partner admin state
.
actor_port_priority
The priority of the actor port. Possible values are 0–255.