Alcatel-Lucent 6850-48 参考指南
Source Learning Commands
page 17-14
OmniSwitch CLI Reference Guide
September 2009
source-learning chassis-distributed
Enables or disables the distributed MAC source learning mode for the chassis. Enabling this mode
increases the number of learned MAC addresses supported to 16K per module and up to 64K per chassis.
increases the number of learned MAC addresses supported to 16K per module and up to 64K per chassis.
source-learning chassis-distributed {enable | disable}
Syntax Definitions
enable
Enables distributed MAC source learning mode.
disable
Disables distributed MAC source learning mode.
Defaults
By default distributed MAC source learning mode is disabled for the chassis.
Platforms Supported
OmniSwitch 9000, 9000E
Usage Guidelines
• After the distributed MAC mode is either enabled or disabled using this command, immediately save
the switch configuration using the write memory command and then reboot the switch.
• Distributed MAC source learning is not supported on an OmniSwitch stackable switches.
• When the distributed MAC source learning mode is disabled (the default), the maximum number of
learned MAC addresses allowed per OmniSwitch chassis-based switch is 16K.
Examples
-> source-learning chassis-distributed enable
-> source-learning chassis-distributed disable
Release History
Release 6.1.3; command was introduced.
Related Commands
MIB Objects
slMacAddressTable
slDistributedMacMode
Displays the current status of the distributed MAC source learning
mode.
mode.