Alcatel-Lucent 6850-48 参考指南

Source Learning Commands

page 17-36

OmniSwitch CLI Reference Guide

Displays the source learning status of a port or link aggregate of ports.

show source-learning [port slot/port[-port2] | linkagg linkagg_num] 

The slot number for the module and the physical port number on that 
module (e.g., 3/1 specifies port 1 on slot 3).

The last port number in a range of ports that you want to configure on 
the same slot (e.g, 3/1-4 specifies ports 1, 2, 3, and 4 on slot 3).

Specifies the link aggregate identifier. 

By default, the source learning status for all switch ports and link aggregates is displayed.

OmniSwitch 6400, 6850, 6855, 9000, 9000E 

• Use the port slot/port or linkagg linkagg_num parameters to display the source learning status for a 

specific port or link aggregate ID.

• When the source learning status is configured for a link aggregate ID, it affects all the ports that are 

members of the link aggregate. However, source learning status cannot be configured on individual 
ports which are members of the link aggregate.

-> show source-learning

port  source-learning

-----+-------------

1/1    disabled

1/2    enabled

1/3    disabled

-> show source-learning port 1/2

port   source-learning

-----+-------------

1/2    disabled

-> show source-learning linkagg 10

port   source-learning

-----+-------------

0/10     disabled