Alcatel-Lucent 6850-48 参考指南

Learned Port Security Commands

OmniSwitch CLI Reference Guide

page 18-9

Converts the dynamically learned MAC addresses on the LPS port(s) to static MAC addresses.

port-security {slot/port[-port2] | chassis} convert-to-static

The slot number for the module and the physical port number on that 
module (e.g., 3/1 specifies port 1 on slot 3).

The last port number in a range of ports you want to configure on the 
same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).

Specifies all the LPS-eligible ports on the chassis.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• You can stop the aging out of dynamic MAC addresses on the LPS port(s) by converting them to static 

MAC addresses.

• The conversion of dynamic MAC addresses to static ones does not apply to LPS mobile and authenti-

cated ports. 

• The number of converted static MAC addresses cannot exceed the maximum number of MAC 

addresses allowed on the port(s).

-> port-security 4/8 convert-to-static

Release 6.1.5; command was introduced.