Alcatel-Lucent 6850-48 参考指南

Ethernet Port Commands

page 19-44

OmniSwitch CLI Reference Guide

Enables or disables auto negotiation on a single combo port, a range of combo ports, or all combo ports on 
a switch.

interfaces slot[/port[-port2]] hybrid {fiber | copper} autoneg {enable | disable | on | off}

Slot number you want to configure.

Port number of the interface you want to configure.

Last port number in a range of ports you want to configure.

Specifies that configuration changes will be made to the SFP port(s).

Specifies that changes will be made to the copper 10/100/1000 RJ-45 
port(s).

Enables auto negotiation.

Disables auto negotiation.

Same as enable.

Same as disable.

OmniSwitch 6400, 6850, 6855

• Refer to the Hardware Userss Guide for combo port numbering. 

• The MIB table and MIB object listed in the “MIB Objects” section below apply to the inactive config-

ured media only. See the “MIB Objects” section in the 

 section for the MIB table 

and MIB object for the active configured media.

-> interfaces 1/47 hybrid copper autoneg disable

-> interfaces 1/47-48 hybrid copper autoneg disable

-> interfaces 1 hybrid copper autoneg disable

Release 6.1; command was introduced.