Alcatel-Lucent 6850-48 参考指南
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide
September 2009
page 2-7
system time
Displays or modifies the switch’s current system time.
system time [hh:mm:ss]
Syntax Definitions
hh:mm:ss
The new time being specified for the system. To set this value, enter the
current time in 24-hour format, where hh is the hour, mm is the minutes,
and ss is the seconds. For example, 14:30:00.
current time in 24-hour format, where hh is the hour, mm is the minutes,
and ss is the seconds. For example, 14:30:00.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E.
Usage Guidelines
If you do not specify a new system time in the command line, the current system time will be displayed.
Examples
-> system time 14:30:00
-> system time
15:48:08
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
systemServices
systemServicesTime
Displays or modifies the switch’s current system date.
Displays or modifies the time zone for the switch.