Alcatel-Lucent 6850-48 参考指南
Ethernet Port Commands
page 19-94
OmniSwitch CLI Reference Guide
September 2009
show interfaces hybrid status
Displays interface line settings (e.g., speed, mode) for combo ports only.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} status
Syntax Definitions
slot
Slot number you want to display.
port
Port number of the interface you want to display.
port2
Last port number in a range of ports you want to display.
fiber
Specifies that the status of the SFP port(s) will be displayed.
copper
Specifies that the status of the copper 10/100/1000 RJ-45 port(s) will be
displayed.
displayed.
Defaults
The show interfaces hybrid status command displays the status and configuration of the active port in
the first row and the status and configuration of the other port in the following row.
the first row and the status and configuration of the other port in the following row.
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
N/A
Examples
-> show interfaces hybrid fiber status
DETECTED CONFIGURED
Slot/ AutoNego Speed Duplex Hybrid Speed Duplex Hybrid Trap
Port (Mbps) Type (Mbps) Mode LinkUpDown
-----+--------+------+------+------+--------+------+------+------
1/45 Enable - - - 1000 Full PF -
1/46 Enable - - - 1000 Full PF -
1/47 Enable - - - 1000 Full PF -
1/48 Enable - - - 1000 Full PF -
2/45 Enable - - - 1000 Full PF -
2/46 Enable - - - 1000 Full PF -
2/47 Enable - - - 1000 Full PF -
2/48 Enable - - - 1000 Full PF -
FF - ForcedFiber PF - PreferredFiber F - Fiber
FC - ForcedCopper PC - PreferredCopper C - Copper