Alcatel-Lucent 6850-48 参考指南

Ethernet Port Commands

OmniSwitch CLI Reference Guide

page 19-109

Displays interface collision information (e.g., number of collisions, number of retries) for combo ports.

show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} collisions

Slot number you want to display.

Port number of the interface you want to display.

Last port number in a range of ports you want to display.

Specifies that statistics for the SFP port(s) will be displayed.

Specifies that statistics for the copper 10/100/1000 RJ-45 port(s) will be 
displayed.

N/A

OmniSwitch 6400, 6850, 6855

• If no slot/port numbers are entered, collision information for all slots/ports on the switch is displayed.

• You can display a specific interface by entering the slot and port number (e.g., 3/1).

• You can display a range of port numbers (e.g., 3/1-4).

• You can display all interfaces in a slot by entering the slot number (e.g., 3).

• These counters do not apply to Gigabit Ethernet traffic.

-> show interfaces 1/47 hybrid copper collisions

02/01,

  Rx Collisions = 6.56E18,  Rx Single Collision = 345464364,

  Rx Multiple Collisions = 6325235326,  Rx Excessive Collisions = 5.65E19