Alcatel-Lucent 6850-48 参考指南
Ethernet Port Commands
OmniSwitch CLI Reference Guide
September 2009
page 19-115
show interfaces hybrid flood rate
Displays interface peak flood rate settings for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} flood rate
Syntax Definitions
slot
Slot number you want to display.
port
Port number of the interface you want to display.
port2
Last port number in a range of ports you want to display.
fiber
Specifies that the status of the SFP port(s) will be displayed.
copper
Specifies that the status of the copper 10/100/1000 RJ-45 port(s) will be
displayed.
displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
• If no slot/port numbers are entered, peak rate settings for all slots/ports on the switch are displayed.
• You can display a specific interface by entering the slot and port number.
• You can display a range of port numbers (e.g., 3/1-4).
• You can display all interfaces in a slot by entering the slot number only.
Examples
-> show interfaces flood rate
Slot/Port peak rate(Mb/second) Enable
-----------+----------------------+---------------
02/01 12 Flood only
02/02 47 Flood only
02/03 16 Flood only
02/04 47 Flood only
02/05 47 Flood only
02/06 47 Flood only
02/07 47 Flood only
02/08 47 Flood only
02/09 47 Flood only
02/10 47 Flood only
02/11 47 Flood only
02/12 47 Flood only
02/13 47 Flood only