Alcatel-Lucent 6850-48 参考指南
Ethernet Port Commands
page 19-120
OmniSwitch CLI Reference Guide
September 2009
debug interfaces backpressure
Displays whether fabric back pressure is enabled or disabled on a Network Interface (NI) or an entire chas-
sis.
sis.
debug interfaces [slot] backpressure
Syntax Definitions
slot
The slot number to display the fabric back pressure state. The valid
range is 1–8 on an OmniSwitch 9700.
range is 1–8 on an OmniSwitch 9700.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 9000
Usage Guidelines
If the slot number is not specified, then the switch back pressure state will be displayed for an entire chas-
sis.
sis.
Examples
-> debug interfaces backpressure
Slot
Backpressure
------+--------------
1
disable
2
disable
3
enable
4
enable
5
disable
6
disable
7
disable
8
enable
-> debug interfaces 3 backpressure
Slot
Backpressure
------+--------------
3
enable
Release History
Release 6.1; command was introduced.
output definitions
Slot
The slot number of the NI.
Backpressure
Displays if the switch fabric back pressure feature is enabled or dis-
abled on this NI. (The default is disabled.)
abled on this NI. (The default is disabled.)