Alcatel-Lucent 6850-48 参考指南
Port Mobility Commands
OmniSwitch CLI Reference Guide
September 2009
page 20-39
show vlan port mobile
Displays current status of mobile properties for a switch port.
show vlan port mobile [slot/port]
Syntax Definitions
slot/port
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3). To enter multiple slots and
ports in a single command, use a hyphen to specify a range of ports
(e.g., 3/1-16) and a space to specify multiple slots (e.g., 3/1-16 5/10-20
8/2-9).
module (e.g., 3/1 specifies port 1 on slot 3). To enter multiple slots and
ports in a single command, use a hyphen to specify a range of ports
(e.g., 3/1-16) and a space to specify multiple slots (e.g., 3/1-16 5/10-20
8/2-9).
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• If a slot/port is not specified, then mobile properties for all ports are displayed.
• Note that the show vlan port mobile command only displays ports that are mobile or are eligible to
become mobile ports. For example, ports that are part of a link aggregate or are configured for 802.1Q
VLAN tagging are not included in the output of this command.
VLAN tagging are not included in the output of this command.
Examples
-> show vlan port mobile
cfg
ignore
port
mobile def
authent
enabled
restore
bpdu
+-----+------+----+--------+--------+--------+-----+
12/12
on
1
off
on
off
off
12/13 off
12/14 off
12/15
on
10
on-avlan
off
on
off
12/16
on
10
on-8021x
on
off
on
output definitions
port
The slot number for the module and the physical mobile port number
on that module.
on that module.
mobile
The mobile status for the port (on or off). If set to on, the port is mobile
and eligible for dynamic VLAN assignment. If set to off, the port is
non-mobile and remains only a member of its configured default
VLAN. Use the
and eligible for dynamic VLAN assignment. If set to off, the port is
non-mobile and remains only a member of its configured default
VLAN. Use the
to enable or disable mobility on a
port.
cfg def
The configured default VLAN for the port, which is assigned using the
command.