Alcatel-Lucent 6850-48 参考指南
Chassis Management and Monitoring Commands
page 2-18
OmniSwitch CLI Reference Guide
September 2009
reload ni
Reloads (i.e., reboots) a specified Network Interface (NI) module.
reload ni [slot] number
Syntax Definitions
slot
Optional command syntax.
number
Slot (i.e., switch) number within a stack that represents the NI module to
be reloaded.
be reloaded.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E.
Usage Guidelines
• On OmniSwitch chassis based switches, the reload ni command reboots only the specified NI. Other
modules installed in the chassis, including primary and secondary CMMs, are not affected
• On OmniSwitch stackable series switches, the reload ni command reboots only the specified switch.
However, if you use this command on a switch that has a primary CMM role in a stack, it will no
longer be primary. Instead, it will be secondary in a two-switch stack and idle in a stack consisting of
three or more switches.
longer be primary. Instead, it will be secondary in a two-switch stack and idle in a stack consisting of
three or more switches.
Examples
-> reload ni slot 2
-> reload ni 2
Release History
Release 6.1; command was introduced.