Alcatel-Lucent 6850-48 硬件手册

OmniSwitch 6850 Series Power Supplies

OmniSwitch 6850 Series Chassis and Hardware Components

page 2-80

OmniSwitch 6850 Series Hardware Users Guide

OmniSwitch 6850 Series power supply can be installed in the following ways:

• As a primary or backup supply directly connected to the back of an OmniSwitch 6850 Series chassis. 

See 

“Connecting a Power Supply Directly to the Chassis” on page 2-80 

for more information.

• As a primary or backup supply connected with a cable. See 

for more information.

DC power supplies require additional installation steps. See 

for more information.

Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding 
strap, or by grounding yourself properly. Static discharge can damage the switch and the backup power 
supply.

Follow the steps below to connect a power supply directly (i.e., without a cable) to the back of an 
OmniSwitch 6850 Series chassis:

1 Place the chassis and power supply on a smooth, clean, and dry surface.

2 Optional. Follow steps a and b to install the power shelf.

a  Carefully slide the power shelf so that it is flush against the back of the chassis.

b Tighten the two captive screws located on the left and right sides of the power shelf.