Alcatel-Lucent ls 6248 用户指南
Command Line Interface
318
4
bridge multicast forward-all
The
bridge multicast forward-all
Interface Configuration (VLAN) mode command
enables forwarding all multicast packets on a port. To restore the default
configuration, use the
configuration, use the
no
form of this
command.
Syntax
bridge multicast forward-all
{
add
|
remove
}
{
ethernet
interface-list |
port-channel
port-channel-number-list}
no bridge multicast forward-all
Parameters
•
add
— Force forwarding all multicast packets.
•
remove
— Do not force forwarding all multicast packets.
• interface-list — Separate nonconsecutive Ethernet ports with a comma and
no spaces; a hyphen is used to designate a range of ports.
• port-channel-number-list — Separate nonconsecutive port-channels with a
comma and no spaces; a hyphen is used to designate a range of
port-channels.
port-channels.
Default Setting
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
There are no user guidelines for this command.
Example
In this example, all multicast packets on port 1/e8 are forwarded.
Related Commands
Console(config)#
interface vlan 2
Console(config-if)#
bridge multicast forward-all add ethernet
1/e8