Fujitsu fi-6670 用户指南
Chapter 8 Troubleshooting
145
Multifeed errors occur frequently.
?
NO
Use the document that satisfies the requirements.
For the document requirements, refer to
For the document requirements, refer to
YES
With the Multifeed Detection set to ON, do the
settings configured satisfy the requirements to
detect multifeeds correctly?
settings configured satisfy the requirements to
detect multifeeds correctly?
NO
Configure the settings for detecting multifeeds correctly.
For the multifeed detection conditions, refer to
For the multifeed detection conditions, refer to
.
Specify the multifeed detection range, if needed, by referring to
YES
Did you scan very thick media such as a plastic
card?
card?
YES
When scanning media like this, disable Multifeed Detection.
NO
Did you fan the document before loading it on the
scanner?
scanner?
NO
Fan the document before loading.
YES
Has the document just been printed out on a
copier or laser printer?
copier or laser printer?
YES
Fan the document three or four times to remove static electricity from the paper.
NO
Is the document stack less than 20 mm (0.79 in.)
thick (10 mm (0.39 in.) when the document size is
larger than A4/Letter)?
thick (10 mm (0.39 in.) when the document size is
larger than A4/Letter)?
NO
Reduce the number of sheets of the document stack.
YES
Are all the consumables (*1) installed correctly?
NO
Correctly install the consumables (*1).
For how to install the consumables, refer to
For how to install the consumables, refer to
YES
Is any of the consumables (*1) dirty?
YES
NO