Fujitsu M3097DE 用户指南

 2-8

SCSI-ID setting (M3097DG)

The default of SCSI-ID is 5. SCSI-ID is set by Setup mode of the operator panel. The procedure to set SCSI
ID is;

1 Turn the power ON by pressing “I” side of the power switch. The scanner displays “Scanner Ready”

on the lower line of LCD.

2 Then press “Next” button. The scanner displays “Mode select 1”.

3 Then press “Next” button. The scanner displays “Mode select 2” meaning that setup mode is ready.

Then press “ENTER” button.

4 Then press “ENTER” button. The scanner displays as follows.

5 Press “Previous” once, then the scanner displays “SCSI ID” on the upper line of the LCD.

6 Select SCSI ID by pressing “

→

” or “

←

” button, and press “ENTER”. (SCSI ID is set.)

7 Press “Exit” to return to “Scanner Ready” screen.