Küppersbusch ekwe320s 安装指导

Installation instructions - EKWE/EKWH - USA

3

• Turn off the power source before installing the honeycomb cooktop.

• Do not operate the appliance until it has been properly installed within

cabinetry or into an opening in the countertop!

• Only qualified personnel should perform installations and repairs on

electrical appliances. Do not repair or replace any part of the appliance
unless specifically recommended in this manual. Do not put your safety at
risk.

• The glass ceramic surface is very durable and can easily withstand light

to medium blows and loads distributed over large areas. You should avoid
dropping concentrated loads like spice bottles onto the surface. The
impact of such items can damage the cooking surface.

• If the cooking surface becomes fractured or cracked, quit using it

immediately. Disconnect the power source and call Customer Service.

• The connecting cables must not come in contact with the hot cooking

surface.

Only KÜPPERSBUSCH built-in cooktops have been designed and tested for
installation above a KÜPPERBUSCH built-in oven. No other cooktops may be
used above the oven.

• Do not use a screw driver to lift the honeycombs out of the opening or

you could damage them. Instead, press the honeycombs out from the
bottom of the opening in the countertop or cabinetry.

– Make sure the plastic finish or the veneer of the built-in kitchen furniture

has a heat-resistant adhesive (160 °C  / 320 °F).

– The countertop must be perfectly horizontal and the opening for the

honeycomb cooktop must be cleanly cut. 

– Make sure there aren't any cross bars underneath the cut-out for the

appliance. Make any necessary adjustments.