Fantom Drives mxnas2500 用户手册
MaxNAS Owner’s Manual
14
3. LCD Operation
The MaxNAS is equipped with an LCD on the front for easy status display and setup. There
are four buttons on the front panel to control the LCD functions: Up
are four buttons on the front panel to control the LCD functions: Up
(▲), Down (▼), Enter (↵)
and Escape
(ESC) keys. The following table illustrates the keys on the front control panel:
Icon
Function
Description
▲
Up Button
Select the previous configuration settings option.
▼
Down Button
Select the next configuration settings option.
↵
Enter
Enter the selected menu option, sub-menu, or parameter setting.
ESC
Escape
Escape and return to the previous menu.
During normal operation, the LCD will be in Display Mode. The following information will
rotate every one-two seconds on the LCD display.
rotate every one-two seconds on the LCD display.
Item
Description
Host Name
Current host name of the system.
WAN
Current WAN IP setting.
LAN
Current LAN IP setting.
Link Aggregation
Current Link Aggregation status
Disk Info
Current status of disk slot has been installed
RAID
Current RAID status.
System Fan
Current system fan status.
CPU Fan
Current CPU fan status
2008/06/16 12:00
Current system time.
3.1 USB Copy
The USB Copy function enables you to copy files stored on USB devices such as USB disks
and digital cameras to the MaxNAS with a press of a button. To use USB copy, Plug your
USB device into the front USB port, and press the Down Button
The USB Copy function enables you to copy files stored on USB devices such as USB disks
and digital cameras to the MaxNAS with a press of a button. To use USB copy, Plug your
USB device into the front USB port, and press the Down Button
(▼). The LCD will display
MicroNet MaxNAS
USB Copy?
Press Enter
(↵) to initiate the process. All of data on the external disk will be copied into
system share named “USBcopy”
.
3.2 Management Mode
To enter into front panel management mode,
press Enter
To enter into front panel management mode,
press Enter
(↵). An “Enter Password” prompt will
show on the LCD. The default LCD password is
“0000”. Enter the system password followed by
Enter
“0000”. Enter the system password followed by
Enter
(↵).
Item
Description
LAN Setting
IP address and netmask of your LAN1 port.
WAN Setting
IP address and netmask of your LAN2 ports.
Link Agg. Setting
Select Load Balance or Failover.
Change Admin Passwd
Change administrator’s password for LCD operation.
Reset to Default
Reset system to factory defaults.
Exit
Exit Management Mode and return to Display Mode.
2-Connecting the MaxNAS
Note:
You can also change the admin password
using the Web Administration Interface (“System”
-> “Administrator Password.”) For more on the Web
Administration Interface, see Chapter 3: System
Management.