Rotel RCD-06 用户手册

Transport Control Buttons

These buttons provide basic control functions 
for the disc transport mechanism. Except 
where noted, all functions are available on the 
RCD-06 front panel and the IR remote 
control. 

6

6

When the transport disc drawer is closed, 
pressing this button automatically opens the 
drawer. To close the drawer, press this button 
again. The drawer can also be closed by 
pressing the PLAY button.

When the drawer is open, the Display will 
read “OPEN”. When it is closed with no disc, 
the display will read “NO DISC”. When the 
drawer closes with a disc inserted, the Display 
will indicate the number of tracks on the disc 
and the total time of the disc in minutes and 
seconds.

7

7

Press the PLAY button to start playing the 
disc. If the disc drawer is open, it will close 
automatically. The number of the track being 
played and the elapsed time will be shown 
in the display, along with the PLAY indicator. 
Normally, the disc will start playing with the 
fi rst track. However, you can select a different 
track using the TRACK buttons or the DIRECT 
ACCESS buttons (see below) before pressing 
the PLAY button to start playing a different 
selection.

8

8

This button stops a disc that is playing and resets 
the player, i.e. if play is resumed, the disc will 
start over from the fi rst track. Pressing the STOP 
button twice quickly in succession cancels any 
programmed selections (see below).

9

9

This button is used to temporarily suspend play. 
The disc continues to spin and play will be 
resumed from the current position. The PAUSE 
indicator will light in the Display. To resume 
playing the disc, press the PAUSE button again 
or press the PLAY button.

0

0

These buttons are used to select tracks on the 
disc. When a disc is playing, pressing the right 
TRACK button advances to the beginning of 
the next track. Pressing the left TRACK button 
returns to the beginning of the current track. 
Pressing twice quickly in succession returns to 
the beginning of the previous track. The new 
track number appears in the Display. 

These buttons are also used to select a track 
before pressing the PLAY button or when 
memorizing tracks for the PROGRAM play 
mode (see below). These selections are made 
by continuously pressing the TRACK buttons 
until the desired track is reached. 

In PROGRAM mode, the TRACK buttons 
advance or reverse to the next track in the 
memorized selection list.

Remote Only
These eleven numeric buttons (labelled 1 
through 0 and >10) are used to directly access 
a track from the IR remote control instead of 
stepping through the tracks using the TRACK 
buttons. 

The fi rst ten tracks on a disc can be selected 
by pressing the corresponding button. For 
example, to play the third track, press the 3 
button on the remote control.

When accessing track numbers greater than 
10, press the>10 button followed by the track 
number. For example, to select track 12, press 
the >10 button followed by the 1 button and 
then the 2 button.

The number of the selected track will appear 
in the main numeric area at the center of the 
Display.

There is also a four by four matrix of track 
numbers (1 – 16) located at the right side of the 
display. This display indicates all of the tracks 
on the disc. If there are more than 16 tracks on 
the disc, all of the digits will light accompanied 
by the word OVER, regardless of which track 
is playing. This matrix is independent of the 
main numeric area of the Display, which will 
always indicate the currently playing track, 
even if above 16.

The DIRECT ACCESS buttons may also be 
used to memorize tracks in PROGRAM mode 
(see below).

Remote Only
These buttons fast forward or fast reverse 
through the currently playing disc as long as 
they are pressed. While the buttons are pressed, 
you will hear high-speed audio. Releasing the 
buttons returns to PLAY mode.

Additional Features

These convenience features add extra 
functionality to the RCD-06, including the 
ability to memorize a group of tracks to be 
played, to repeat a disc, program, or track 
over and over, to play the tracks on a disc in 
random order, to automatically play the fi rst 
10 seconds of each track, and to select from 
several available time displays.

Remote Only
This button, labeled PROG, allows you to 
memorize as many as 20 tracks on the current 
disc for playback in a specific order. For 
example, you could instruct the RCD-06 to 
play track 5, followed by track 3, followed 
by track 8. To begin a program:

1  Insert a disc and press the OPEN/CLOSE 

button to close the drawer. The RCD-06 
will read the contents of the disc.

2  Press the PROGRAM button on the remote 

control. The PROGRAM indicator will 
light up in the Display, along with “P:00” 
indicating that the unit is waiting for the 
fi rst track to be memorized.

3.  Enter the fi rst track number using the DIRECT 

ACCESS buttons. Your selection will be 
memorized automatically and the Display 
indicator will change to “P:01”, indicating 
that one track has been memorized. Continue 
entering the rest of your selections using 
the DIRECT ACCESS buttons. Note that 
there is no need to press the PROGRAM 
button as each selection is memorized as 
it is entered.

Once you have memorized a play list, the 
RCD-06 remains in PROGRAM mode until 
you open the disc drawer or press the STOP 
button twice in succession. If you press the 
PLAY button, the memorized program will play 
instead of the entire disc, starting with the fi rst 
selection in the memorized list. 

When a PROGRAM has been memorized, most 
functions that would normally affect the entire 
disc operate on just the memorized program. 
For example, the TRACK buttons advance to 
the next track in the memorized program, not 
the next track on the disc. Likewise, the REPEAT 
button (see below) continuously plays the 
memorized program, not the entire disc.