Humminbird 1158c combo 用户指南
101
Sonar X-Press™ Menu
Upper Range
(Advanced: Sonar, Split Sonar, and Active Sonar Side Views only)
Settings: 0 to 1490 feet or 0 to 497 meters [International models only];
Default = 0
Default = 0
Upper Range sets the shallowest depth range that will be displayed on the Sonar, Split Sonar,
and Active Sonar Side Views. Upper Range is often used with Lower Range.
and Active Sonar Side Views. Upper Range is often used with Lower Range.
NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range
regardless of the manual settings entered.
regardless of the manual settings entered.
Lower Range
Settings: Auto, 10 to 1500 feet, 3 to 500 meters [International Models
only]; Default = Auto
only]; Default = Auto
Lower Range sets the deepest depth range that will be displayed by the unit.
Auto: The Lower Range will be adjusted by the unit to follow the bottom automatically. Auto is
the default setting.
the default setting.
Manual: You can adjust the Lower Range to lock the unit on a particular depth.
will be
displayed in the lower right corner of the screen to indicate the unit is in Manual mode. Adjust
the Upper and Lower Range together to view a specific depth range, especially when looking
for fish or bottom structure.
the Upper and Lower Range together to view a specific depth range, especially when looking
for fish or bottom structure.
NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range
regardless of the settings entered manually.
regardless of the settings entered manually.
Chart Speed
Settings: 1-10, where 1 = Slow, 10 = Fastest; Default = 5
Chart Speed determines the speed at which the sonar information moves across the display,
and consequently the amount of detail shown.
and consequently the amount of detail shown.
A faster speed shows more information and is preferred by most anglers; however, the sonar
information moves across the display quickly. A slower speed keeps the information on the
display longer, but the bottom and fish details become compressed and may be difficult to
interpret. Regardless of the Chart Speed setting, the RTS Window™ will update at the maximum
rate possible for the depth conditions.
information moves across the display quickly. A slower speed keeps the information on the
display longer, but the bottom and fish details become compressed and may be difficult to
interpret. Regardless of the Chart Speed setting, the RTS Window™ will update at the maximum
rate possible for the depth conditions.
For example, if you are fishing in 60 feet of water but are only interested in the first 30 feet
(surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display
will show the 0 to 30 foot range, which allows you to see a more detailed view than you would
see if the display went all the way to the bottom.
(surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display
will show the 0 to 30 foot range, which allows you to see a more detailed view than you would
see if the display went all the way to the bottom.
M
For example, if you are only interested in the area between 20 and 50 feet deep, you should
set the Upper Depth Range to 20 and the Lower Depth Range to 50. The Sonar View will then
show the 30 foot area between 20 and 50, and will not show the surface or the bottom
(assuming the bottom is deeper than 50 feet), and will show greater detail for that area
between 20 and 50 feet.
set the Upper Depth Range to 20 and the Lower Depth Range to 50. The Sonar View will then
show the 30 foot area between 20 and 50, and will not show the surface or the bottom
(assuming the bottom is deeper than 50 feet), and will show greater detail for that area
between 20 and 50 feet.