AG Neovo TS-15S 用户指南
Troubleshooting
Symptom
Check Items
• No picture
• LED power indicator is not
lit
• Check that the power switch of the
monitor is turned on.
• Check that the power adapter is properly
connected to the monitor.
• Check that the power cable is properly
connected to the power adapter.
• Check if the power outlet is providing
power by plugging in another device to
the outlet.
• No picture
• The LED power indicator
is lit up amber
• Ensure the computer is not in power
saving mode. (Move the mouse or press
a key on the keyboard to wake up the
computer.)
• Check that the power switch of your
computer or video source is in the “ON”
position.
• Check that the video signal cable is
properly connected.
• The texts are not solid
• Check that the resolution of the video
signal is set to 15”-1024 x 768, 17” -
1280x1024
1280x1024
• Press the
(Auto) button to run
automatic adjustment.
• Adjust Clock and Phase in the OSD
menu to fine tune.
• Adjust Sharpness in the OSD menu if
you are not using 1024 by 768 resolution
• Screen image is not
Centered properly
• Some lines missing
• Press the
(Auto) button to run
automatic adjustment.
• Adjust H. Position and V. Position to fine
tune.
• There are tiny red, green,
blue or black tiny on the
screen.
screen.
• The TFT LCD panel is made of millions
of small transistors. Each defective
transistor will cause a red, green, or blue
dot.
• Under AG Neovo’s warranty AG Neovo
guarantees no more than 3 missing dots
in every single monitor. This is inline with
the current industry standard
(requirement).
27