AG Neovo TS-15S 用户指南
16
Warning Messages and Troubleshooting
Warning Messages
If the message appears on
the screen
Check the items
CAN NOT DISPLAY THIS INPUT
SIGNAL
The input signal is not acceptable by the monitor.
• Please check the video resolution and frequency
• Please check the video resolution and frequency
range is within that specified for the monitor.
• Please refer to the “Technical Specifications” section
of this user manual for details.
NO SIGNAL INPUT
No signal inputs are detected from neither VGA-In.
• Check that the power switch of your computer or
• Check that the power switch of your computer or
video source is in the “ON” position.
• Check that the video signal cable is properly
connected.
• Ensure that no pins are bent or pushed in the video
input connector.
MAIN CONTROL MENU
LOCKED/UNLOCKED
The main control menu (On-Screen Display menu) is
locked to avoid unwanted adjustment.
Press
,
,
buttons together for 5 seconds to
unlock the main control menu.
NO VIDEO SIGNAL FROM
VGA-IN
No signal input is detected from VGA-In connector.
• Check that the power switch of your computer is in
• Check that the power switch of your computer is in
the “ON” position.
• Check that the video signal cable is properly
connected to video input 1.
• Ensure that no pins are bent or pushed in the video
input connector.
WAIT FOR AUTOMATIC
ADJUSTMENT
The monitor is detecting the input signal and then
adjusting automatically the monitor parameters
accordantly.
• It takes around 5 seconds to finish the whole process.
• You are recommended to run auto adjustment by
• It takes around 5 seconds to finish the whole process.
• You are recommended to run auto adjustment by
pressing
button every time you changed the
resolution or refresh rate.