Conairphone cid500 业主指南

When alarm comes on at the set time, to turn alarm
off, press either the [ALARM], [SLEEP ON/OFF] or
[POWER] button to stop the alarm.

When the alarm comes on, press the [SNOOZE], the
alarm will stop and come on after 7 minutes. The alarm

 icon will flash rapidly.

NOTE:
If wake up to CD or Radio, the LCD will display the
time 8 seconds after the alarm turns on.

IMPORTANT!!
• Radio does not operate during AC power failure.
• If the handset is not placed firmly in the cradle, the

CD and radio will be muted.

1. Turn on the power by pressing the [POWER]. The

POWER LED on the lower side of the adjustable
LCD display.

2. Press the [CD/RADIO] to switch the unit to radio

mode.

3. Press the [AM/FM] to select the desired reception

band.

4. Tune to the desired station by pressing [TUNE

RADIO/ADJ TIME  ] or [TUNE RADIO/ADJ TIME

]. Each time the button is pressed, the frequency

changes by one step.

5. For automatic tuning, keep the [TUNE RADIO/ADJ

TIME  ] or [TUNE RADIO/ADJ TIME  ] pressed
until the frequency starts to change rapidly, then
release the button and it will stop at the next strong
station.

6. If you tune into a FM stereo station, STEREO LED

will light on.

7. To turn off the Radio, press the [POWER]. The

POWER LED will go off.

Note: Press any radio function keys or volume keys,
the display will show AM or FM stations for about 8
seconds and back to the time on the display.

1. Press the [AM/FM] to select AM or FM band, and

press the [TUNE RADIO/ADJ TIME  ] or [TUNE
RADIO/ADJ TIME  ] to select a station.

2. Press the [RADIO/CD MEM], 

 will flash on

the clock display.

3. While the 

 is blinking, press the [PRESET  ]

or [PRESET  ] to choose a memory location (01-
10).

4. Press the [RADIO/CD MEM] again to confirm. The

station now broadcasting is stored into that preset
memory.

5. Repeat the above steps 2 to 4 to store other stations

into the memory.

NOTE: Up to 10 AM and 10 FM stations can be stored
into the preset memories.

1. Turn on the power by pressing the [POWER]. The

POWER LED lights on.

2. Press the [CD/RADIO] to switch the unit into Radio

mode.

3. Press the [AM/FM] to select the desired reception

band.

4. Press the [PRESET  ] or [PRESET  ] to select the

stations stored.

5. To turn off the Radio, press the [POWER] again.

The POWER LED goes off.

During CD or Radio playing, insert a suitable headset
with a 3.5mm plug (not included) into the HEADPHONE
jack, you can listen to CD or radio through the headset.
If you want to change back to the amplifier, just unplug
the headset.

IMPORTANT!!
• CD does not operate during the AC power failure.
• If the handset is not placed firmly in the cradle, the

CD and radio will be muted.

1. Press the [POWER] to turn on the power. The

POWER LED lights up.

2. Press the [CD/RADIO] to switch the unit into CD

mode.

3. Press the [OPEN/CLOSE] to open the CD Door.
4. Insert a CD with the Label side facing up. Press

the [OPEN/CLOSE] again to close the CD door.

5. ‘- -’ will flash on the clock display, and then the

total number of tracks will be shown.
NOTE: If the compact disc is upside down or
damaged, the clock display will show ‘00’ instead
of the total number of tracks on disc.

6. Press the [ 

 ] to begin play. The track number

which is currently playing will appear in the clock
display.

7. Adjust the sound volume to the desired level by

pressing the [VOLUME  ] or [VOLUME  ].

8. Press the [ 

 ] to pause mode and temporarily

stop playing the music.

9. To re-play the music, press the [ 

 ] again.

10. Press the [   ] to stop playing the music, and the

total track numbers on the disc will be shown on
the clock display.

11. To turn off the power, press the [POWER] again.
NOTE:
1. Play will stop when the last track on the disc has

finished playing.

2. Do not open the CD door during playing back the

CD.

1. While the CD is playing, press and release the [

]

once or repeatedly until the desired track is selected.
The clock display will show the selected track
number.

NOTE: If the [

] is pressed in the last track, it will

advance to the first track.

2. During playback, press the [

] once, it will play

again from the beginning of the current track. If the
[

] is pressed twice or more in rapid succession

play will go back to previous tracks.
NOTE: If the [

] is pressed twice in the first track,

it will return to the last track.

3. It is also possible to select the desired track in stop

or pause mode by using the [

] or [

]. After

selection, press [ 

 ] to begin play.

21

22

23

24