RCA 23200re3 用户指南

In-use Indicator 

When the handset is in talk mode using the cell network, the in-use indicator on 

the docking station illuminates.

Docked Indicator   When the docking station identifies the cell phone successfully, the docked  

indicator illuminates.

The timer records the total airtime minutes (incoming and outgoing) used by the cell when docked to 

the station.  

NOTE: It does NOT record minutes used when the cell phone is not docked to the system.

0000:30  

Whenever a call is being conducted, the timer starts to count automatically. The call time will be 

shown on the docking station display in the nearest hour/minute format. 
After the call is terminated, the timer information will be shown on the docking display for one minute.
The timer will retain accumulated minutes after the cell phone is removed from the cell dock. When 

cell phone docking is re-established, the timer will continue to count accumulated minutes.
In the event that a different cell phone is connected to the cell dock, the display will show  

RESET?  YES NO.  The timer will default to NO if you do not make a selection within 20 seconds. The 

timer can be reset manually. See “Programming the Docking Station”.

Once the cell phone is recognized and the docked indicator is illuminated, the docking station will 

provide the corresponding power to charge the cell phone automatically. The docked cell phone will 

show the charging information accordingly.

Your cell docking system comes with a USB cable that allows for software upgrades via the internet at 

www.rca.com, or separately purchased upgrade kits.

Current cell phone is listed on back of box but 

cell phone does not operate properly.

Go to www.rca.com for latest software 

revision.