RCA dxd416re 用户指南

5.

There are three ways to input the code for your VCR:

•

Locate the manufacturer of your VCR from the list on the screen using the up and down
arrows on the remote control.

•

Select the Code Search button to automatically test all codes.

•

Select Other to enter the codes manually.

6.

Follow the on-screen instructions to ensure that you are using the correct code. If the VCR
automatically stops, then you know that the receiver and the VCR are communicating.

•

Some VCR brands may not be capable of being controlled by the  receiver.

If you used the advanced connection, you must tune your TV to the Video Input Channel to see the
screens. Since there are so many brands and models of TVs, there are just as many ways to access a
TV’s Line Input Channel. Below are some things you can try.

•     If your TV brand is RCA, GE, or Proscan, press TV on the remote that came with your receiver.

Then press the WHO•INPUT button on the remote.

•     If your TV brand is not RCA, GE, or Proscan, consult your TV Owner’s Manual.

If you need to run the interactive setup, select Options from the Main menu, then select Interactive
Setup.

If you just want to check your dish pointing coordinates, or run the signal strength meter, select
Dish Pointing from the Main menu.

Follow these steps whenever you need to install or change the batteries in your digital satellite
receiver’s remote.

1.

Remove the cover from the battery compartment.

2.

Insert batteries into the battery compartment, matching
the + and – end of each battery.

3.

Replace the cover.

Plug the end into the wall outlet. Be sure to insert the plug completely.

To turn on the system, press the SAT button on the remote or the ON•STBY button on the front
panel. If your TV brand is RCA, GE, or Proscan, press the TV button on the remote to turn on the TV.
If your TV brand is not RCA, GE, or Proscan, see the next section, Using the Remote, for details on
how to use the remote to control your TV.