RCA vr518 用户指南
52
appendix a: reference
Internal clock shows incorrect time or date
•
Power interruption.
•
Check to make sure the clock is set accurately (check AM/PM and date).
•
Check Auto DST setting. The clock may have adjusted for daylight-saving time.
Time did not adjust for daylight-saving time
•
Check to make sure Auto DST feature is turned on.
VCR makes noise when stopped
•
VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate
for a few minutes after you put the VCR in the stop mode.
for a few minutes after you put the VCR in the stop mode.
Will not Auto Channel Search active channels correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
•
If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using
either CABLE TV or ANTENNA.
either CABLE TV or ANTENNA.
•
May not need to auto channel search if using a cable box. Refer to the VCR Channel List or contact your
cable company for more information.
cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator flashes
•
Clock is not set.
•
Check to make sure there is a cassette in the VCR when a timer recording is set.
Time counter disappears during searching
•
This is normal.
On-screen menus appear in English, French, or Spanish
•
Check Language feature.