RCA vr540 用户指南
22
VCR Basics
Playing a Tape
1.
Tune the TV to your VCR viewing channel
(3, 4, or TV’s video input).
(3, 4, or TV’s video input).
2.
Insert a tape in the VCR.
TV ¥ VCR
CHANNEL
TRACKING
PLAY ¥ PAUSE
REV
RECORD
FWD
STOP ¥ EJECT
POWER
AUDIO IN
VIDEO IN
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
begins playback (if the safety tab on the cassette is removed).
•
Press FWD or REV to position the tape.
•
Press PLAY (if necessary) to begin tape play.
•
Press PAUSE for stop action.
•
Press TRACKING up or down to remove any streaks from the
picture, if necessary.
picture, if necessary.
•
Press STOP to stop playback.
Automatic Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR’s power is
turned on.
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR’s power is
turned on.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
switches from pause to stop after a
few minutes to reduce tape wear.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
POWER Turns the TV on and off.
SLOW + and – Used with some TV menus to select and adjust
features.
features.
VOL Up and Down Raises and lowers sound of TV.