RCA vr552 用户指南

The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.

For example, if you record a 30-minute program at the
beginning of the tape and you want to go to the end of
that program to begin another recording, you would:

1.

Press INFO  twice to display the time counter.

2.

Press CLEAR to reset the time counter to 0:00:00.

3.

Press FWD to forward the tape until the time counter
reads 0:30:00.

4.

Press STOP. This is the appr oximate end of the program.
(You may want to pr ess PLAY to verify.) Now, you can
begin recording at this spot.

5.

Press INFO twice to remove the time counter from the
screen and return to the normal display mode.

The INFO button shows the status of the VCR (STOP , PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.

1.

Press INFO to see the on-screen displays.

2.

Press INFO again to have only the time counter remain
on the screen.

3.

Press INFO again to have no displays appear on the
TV screen. This is useful for dubbing tapes.

Turning off the VCR also resets the displays.

Stop   Ch 05    0:30:00
       

11/18/97 Tue 01:30PM SLP

SECONDS

MINUTES

HOURS

                0:30:00