RCA vr552 用户指南
51
appendix: reference
Display Panel
TIME The current time appears. Only an AM indicator appears with the time.
There is no indicator for PM.
There is no indicator for PM.
TIME COUNTER This shows the actual time it takes to play back a segment of a
recorded tape. This counter helps locate the beginning or end of programs taped.
recorded tape. This counter helps locate the beginning or end of programs taped.
REC INDICATOR Lights when the VCR is recording.
TIMER INDICATOR (
) Lights during an express or timer recording or when the
VCR is set for a timer recording and the VCR is turned off. Flashes when the clock is not
set. Flashes when the timer redcording is set and there is no tape in the VCR.
set. Flashes when the timer redcording is set and there is no tape in the VCR.
VCR INDICATOR (Applies only if the VCR Viewing Channel is 3 or 4.) Press the
TV•VCR button on the remote or front VCR panel to turn on or off.
TV•VCR button on the remote or front VCR panel to turn on or off.
•
VCR Indicator on: Picture from VCR
•
VCR Indicator off: Picture from the TV channel.
Back Panel
3 CH. 4 Switch Selects the channel to which you will tune the TV to see the VCR
picture if you connect the VCR using one of the basic hookups.
picture if you connect the VCR using one of the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another component, like a VCR or
camcorder, when it is connected to these jacks. Use INPUT on the remote to select “L” to
record from these jacks.
camcorder, when it is connected to these jacks. Use INPUT on the remote to select “L” to
record from these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to another component, like a TV
or VCR, when it is connected to these jacks.
or VCR, when it is connected to these jacks.
ANT IN Jack Receives a signal from an antenna or cable system when attached.
RF OUT Jack Passes signal to TV using the cable supplied.
3 CH. 4
VIDEO
AUDIO
ANT. IN
RF OUT
OUT
IN