RCA vr623hf 用户指南

       PREFERENCES
(Press VCR2 to Change)
2 Auto Play:  

ON

3 Auto TV/VCR:

ON

4 EnergySaver:

2:00

5 Front Panel:

AUTO

6 Tape Speed:

SLP

7 Set Auto Repeat

0 Exit

 

       PREFERENCES
1 Remote Control:

VCR2

2 Auto Play:  

ON

3 Auto TV/VCR:

ON

4 EnergySaver:

2:00

5 Front Panel:

AUTO

6 Tape Speed:

SLP

7 Set Auto Repeat

0 Exit

The VCR will only respond to the compatible remote’s
VCR2, VCR2•LD, or VCR2•DVD button. If the PREFERENCES
setting is changed to VCR2, the remote that came with
your VCR will no longer control it.

To change the setting back to VCR1, allowing the original
remote control which came with your VCR to control the
unit, use the compatible remote to display the
PREFERENCES menu. Press 1, and then press the VCR
button on the original remote control.

This feature allows the VCR to automatically start playing a
tape when inserting a tape with the safety tab removed. In
the PREFERENCES menu, press 2 to switch between ON and
OFF.

•

Select ON if you want a tape with its safety tab
removed to start playing automatically when inserted
in the VCR.

•

Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.

This feature controls whether the TV/VCR switch changes
automatically to the VCR mode. Press 3 to switch between
ON and OFF.

•

Select ON if you want the VCR to switch to the VCR
mode when the VCR is turned on or a cassette is
inserted. This only applies if you connect the IN (FROM
ANT.) and OUT (TO TV) jacks of your VCR to your TV
and watch your VCR on channel 3 or 4 of your TV.

•

Select OFF if you want the VCR to remain in the TV
mode. This is useful if you watch your VCR on the TV’s
video input and you don’t want your antenna/cable
signal interrupted by the VCR. Refer to the Connections
section toward the back of the manual.