RCA vr623hf 用户指南

The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It
helps locate the beginning or end of programs you taped.
The time counter resets to 0:00:00 whenever the tape is
ejected from the VCR.

For example, if you record a 30-minute program at the
beginning of the tape and you want to go to the end of
that program to begin another recording, you would:

1. Press INFO twice to display the time counter.

2. Press CLEAR to reset the time counter to 0:00:00.

3. Press FWD to forward the tape until the time counter

reads 0:30:00.

4. Press STOP. This is the approximate end of the program

(you may want to press PLAY to verify). Now, you can
begin recording at this spot.

5. Press the INFO button on the remote to remove the

time counter from the screen and return to the normal
display mode.

The INFO button shows the status of the VCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time,
and tape speed on the TV screen. The date and time must
be set before they can be displayed.

1. Press INFO to see the on-screen displays.

2. Press INFO again to have only the time counter remain

on the screen.

3. Press INFO again to have no displays appear on the

TV screen. This is useful for dubbing tapes.

Turning off the VCR also resets the displays.

The audio setup features enhance your tape playback and
recording. The features in this section are accessed through
the AUDIO menu and are shown:

1. Press MENU to display the VCR MAIN MENU.

2. Press 6 to display AUDIO menu.

                0:30:00

SECONDS

MINUTES

HOURS

                0:30:00

SECONDS

MINUTES

HOURS

Stop   Ch 05    0:30:00
       

11/18/97 Tue 01:30PM SLP

SECONDS

MINUTES

HOURS